arc starting meaning in Chinese
电弧接通
起弧
Examples
- Cerium tungsten electrodes have easy arc starting performance and low are keeping current . it is especially used to weld pipes , stainless steel articles and fine miniparts
铈钨电极在低电流条件下有着优良的起弧性能，维弧电流较小，因此，它常常用于管道、不锈钢制品和细小精致部件的焊接。 - Transitional feature of the arc and metal droplet in the welding process with steam shielded arc is investigated by means of analysing the waveforms of welding voltage and current under different welding regimes and it is found that there are two types of arc process behavor ? " arc starting - arc blowing out - short - circuiting " and " arc - starting - short - circuiting " . under the condition of constant diameter of welding wire and its feeding speed , the arc process behavor can be changed by adjusting the inductance of welding circuit as well as the voltage of power supply . if arc process behaves as alternative process of " arc starting - arc blowing out - short - circuiting " with minimum time duration of arc blowing out and maximum frequency of short - circuit transition , the welding process will be stable with less spatter and smooth weld bead
通过分析不同焊接规范下的焊接电压和电流的波形.研究了水蒸气保护下电弧及熔滴过渡的特点，发现其电弧过程行为有“燃弧?熄弧?短路”和“燃弧?短路”两种形式.在焊丝直径和送丝速度一定的情况下，通过调节焊接回路中的电感量和电源电压，可以改变电弧的过程行为形式.若电弧过程呈“燃弧?熄弧?短路”交替进行，并且熄弧时间最短时，短路过渡频率最高，在这种情况下，飞溅小，焊道成型好，焊接过程稳定 - Abstract : this paper introduces a high frequency arc starting device for welding inverter . it discusses the connection between the device and the welding inverter , and the structrue and the principle of the device . the tests show the arc starter is reliable , easy to regulate , and has good compatibility with the welding inverter
文摘:介绍了一种与逆变焊机配用的高频引弧器，文中讨论了该引弧装置与配用的逆变焊机的连接，结构和工作原理，并通过实验表明，该装置引弧可靠，调节方便，与逆变焊机有良好的兼容性。